A Waste Free, Perfectionists Revolution In Tile Fitting.
A group of commercial tilers In California recognised that the old tile levelling system is messy, wasteful and fiddly. They've came up with the new tile leveling system which is changing the lives of tradesmen everywhere.
Introducing the Eco-Fit Tile Leveling System, the tile levelling system that improves tile installation speed and makes it a breeze for the installer. Fine Adjustments can be made at any point, and when the job is finished they can simply be twisted away and reused on the next job!
By using this leveling system, the tiles are virtually flawless and the surface more flush than ever before possible
Reusable Tile Leveling System prevent tiles from moving while curing and most importantly, it is reusable!
- Lay the first piece of tile, leave the seam to be ≥2mm or above.
- Insert the T-pin along the crack, then rotate it 90 degrees, clamp the T-pin at the bottom of the two bricks and tighten the adjusting cover so that the two tiles are on the same level.
- Before the cement or tile glue has completely dried up (usually no more than 6 hours), untighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile and remove the leveler.
- Clean and dry the leveler and it is ready for reuse.
- The system ensures flatness between tiles avoiding inequalities.
- Reusable and it is easy enough to fix or remove with special wrench.
- Suitable for 3mm to 25mm thickness of the tile, suitable for tile gap ≥2mm.
- Helps DIY and professional tile layers increase the efficiency of laying tiles and obtain perfect finishing.
- Improve tile installation speed and reduce installer fatigue/stress.
- Reduce the need for grinding and polishing.
- Prevent tiles from moving while curing.
50pcs x Tile levelers (JUMBO PACK)
1pcs x Special wrench